- All steel is of highest quality and hot galvanized.
- Consists of an integral motorized gear box, two main rollers and a spring loaded sensor roller, all placed in a galvanized steel frame.
- The wear surfaces of the rollers
are
based on mesh steel to ensure a
long
life time and accurate
measurements.
Steel mesh plus a flintstone/bauxite surface for test of all tires except spike tires.
Steel mesh for test of all tires including spike tires.
- Can be supplied in a minimum configuration and still allows for later upgrade to all options.
- Prepared for test line expansion including suspension tester, speedometer tester and side slip tester all controlled from the same electronics with results shown on one display.
BM7010 & BM7110 ROLLER BRAKE TESTER
Product description
The design of the BM7010 & BM7110 roller brake tester is unique as it allows for split bed installation over an inspection pit.
This brake tester features a large range of options that allows for a customized configuration.
OPTIONS
-
Robust and long lasting:
-
Easy to use with BM software:
- Integrated guide.
- Advanced graphics printout.
- Diagnostic printout with or without connection to PC/Notebook.
- Calculation of test results according to the requirements of many national authorities.
- BM
FlexCheck software:
- Advanced data collection, storing and presentation of test results.
- Data capture from a complete inspection lane.
- PDA/smartphone/tablet
solution that
allows
the operator to control
and
monitor the test results
directly on a handheld
unit.
BM FlexCheck on smartphone and tablet
-
Infrared remote control with an operating distance of 15-25 metres.
-
Cable remote control with a maximum operating distance of 30 metres.
-
Large and easy-to-read aluminium display with analogue and digital readout of all relevant test data.
- Two large dials showing analogue readings of left and right brake forces.
- 50 mm high bright digital readout of brake force imbalance in %.
- Optional digital readouts of e.g. ovality, pedal force, weight, efficiency, suspension values, speed and distance values.
- Display units are available in daN, kgf or kN.
-
Pedal force measurement.
-
Test of 4×4 driven vehicles.
-
Heating package for outdoor installation.
-
Motorcycle mode that allows for testing of motorcycles and 3-wheeled vehicles.
The BM7010 & BM7110 roller brake tester is approved by several international authorities i.e. RWTÜV Germany.
Technical data
| ROLLER BED (LXWXH) | 910 x 800 x 220 mm |
|---|---|
| SUBFRAME FOR SPLIT BED INSTALLATION PER SIDE (LXWXH) | 965 x 855 x 250 mm |
| ROLLER LENGTH | 600 mm |
| ROLLER DIAMETER BM7010 | 175mm |
| ROLLER DIAMETER BM7110 | 182mm |
| FRICTION COEFFICIENT OF ROLLER FROM FACTORY DRY/WET | Min. 0.8/0.7 |
| WHEEL SPAN | 880 to 2080 mm |
| DISTANCE BETWEEN ROLLER CENTRES | 350 mm |
| MAXIMUM TEST AXLE WEIGHT | 3500 kg |
| MAXIMUM DRIVE OVER AXLE WEIGHT | 4000 kg |
| GEAR MOTOR SIZE | 3.8 kW |
| MAX. BRAKE FORCE MEASUREMENT | 750 daN |
| TEST SPEED | 4.5 km/h |
| DISPLAY (LXWXH) | 735 x 500 x 140 mm |
| DISPLAY BRAKE FORCE SCALE | 0 – 620 daN |
| BRAKE FORCE MEASURING ACCURACY |
0 – 100 daN: +/- 1
daN > 100 daN: +/- 1% FS |
| PEDAL FORCE MEASURING ACCURACY | 0 – 100 daN: +/-1 daN |
| POWER AND FUSES |
3 x 400 Vac + N + PE, Min.
20
Amp 3 x 230 Vac + PE, Min. 35 Amp |
Advantages
- IT system using latest app technology for smartphone and tablet (Windows and Android).
- Split bed roller set makes it possible to install over an inspection pit.
- The display can be mounted either on the wall, saving
floor
space, or on floor column devices, that are designed so
equipment is protected even when floor is cleaned with
chemicals. It can also be mounted on a trolley
making
it easy to move around.
- Completely flush-floor. When roller cover plates are placed on top of the roller bed, the BM7010 becomes one with the workshop floor making it easy to drive over it from any angle.
Installation
- Hot galvanized subframes can be concreted into the ground before the actual brake tester is installed.
- The subframes ensures easier planning and implementation of installation as well as correct alignment of the brake tester during concreting.
- Can be installed both indoor and outdoor in most environments from -30ºC to 60°C and humidity up to 95.
- Special conversion subframes available to retrofit directly in to the recesses from other brake tester brands, i.e. Kismet, Crypton, Tecalemit.