- All steel is of highest quality and hot galvanized.
- Consists of an integral motorized gear box, two main rollers and a spring loaded sensor roller, all placed in a galvanized steel frame.
- The wear surfaces of the rollers
are
based on mesh steel to ensure a
long
life time and accurate
measurements.
Steel mesh plus a flintstone/bauxite surface for test of all tires except spike tires.
Steel mesh for test of all tires including spike tires.
- Can be supplied in a minimum configuration and still allows for later upgrade to all options.
- Prepared for test line expansion including suspension tester, speedometer tester and side slip tester all controlled from the same electronics with results shown on one display.
BM5200 ROLLER BRAKE TESTER
Product description
The BM5200 roller brake tester is capable of measuring up to 1450 daN/kgf in each wheel, which equals or out-performs most conventional brake testers on the market.
This brake tester features a large range of options that allows for a customized configuration.
OPTIONS
-
Robust and long lasting:
-
Easy to use with BM software:
- Integrated guide.
- Advanced graphics printout.
- Diagnostic printout with or without connection to PC/Notebook.
- Calculation of test results according to the requirements of many national authorities.
- BM
FlexCheck software:
- Advanced data collection, storing and presentation of test results.
- Data capture from a complete inspection lane.
- PDA/smartphone/tablet
solution, which allows
the
operator to control and
monitor the test results
directly on a handheld
unit.
BM FlexCheck on smartphone and tablet
-
Infrared remote control with an operating distance of 15-25 metres.
-
Large and easy-to-read aluminium display with analogue and digital readout of all relevant test data.
- Integrated guide.
- Large analogue dials showing readings of left and right brake forces.
- 65 mm high bright digital readouts of other measurement results.
- Modularly designed so that it can be customized to existing and future demands.
- Display units are available in daN, kgf or kN.
-
Up to 3 displays can be connected.
-
Optional cable or radio air/hydraulic pressure system.
-
Optional cable or radio pedal force meter.
-
Test of 4×4 driven vehicles.
-
Optional automatic axle weighing system.
-
Heating package for outdoor installation.
The BM5200 roller brake tester is approved by several international authorities.
Technical data
| ROLLER BED (LXWXH) | 3240 x 4330 x 160 mm |
|---|---|
| ROLLER DIAMETER | 150 mm |
| ROLLER LENGTH | 1000 mm |
| FRICTION COEFFICIENT OF ROLLER FROM FACTORY DRY/WET | Min. 0.8/0.7 |
| WHEEL SPAN | 700 to 2700 mm |
| DISTANCE BETWEEN ROLLER CENTRES |
430 mm 554 mm |
| MAXIMUM TEST AXLE WEIGHT | 6000 kg |
| MAX. WEIGHT MEASUREMENT | 6000kg |
| GEAR MOTOR SIZE | 3.8 kW |
| MAX. BRAKE FORCE MEASUREMENT | 1450 daN |
| TEST SPEED | 2.0 km/h |
| DISPLAY (LXWXH) | 930 x 820 x 100 mm |
| CONTROL BOX (LXWXH) | 600 x 600 x 210 mm |
| DISPLAY BRAKE FORCE SCALE |
0 – 800 daN 0 – 4000 daN |
| BRAKE FORCE MEASURING ACCURACY |
0 – 100 daN: +/- 1
daN > 100 daN: +/- 1% FS |
| WEIGHT MEASURING ACCURACY |
0-100 kg: +/-2 kg >100 kg: +/-2% FS |
| PEDAL FORCE MEASURING ACCURACY | 0 – 100 daN: +/-1 daN |
| POWER AND FUSES | 3 x 400 Vac + N + PE, Min. 25 Amp |
Advantages
- IT system using latest app technology for smartphone and tablet (Windows and Android).
- The display can be mounted either on the wall, saving
floor
space, or on floor column devices, that are designed so
equipment is protected even when floor is cleaned with
chemicals. It can also be mounted on a trolley making it
easy to move around.
- Can easily be transported from site to site on a flatbed truck or trailer. This allows for sharing the brake tester between different sites or to perform brake test of vehicles at fleet owners site.
Installation
- Can be installed in-ground using a hot galvanized subframe. Thus it can be used on-ground in a temporary location and later moved to a new location to be – if requested – installed in-ground.
- Can be installed both indoor and outdoor in most environments from -30ºC to 60°C and humidity up to 95.