Modular system to load vehicles up
to
10, 20, 30, 40 or 50 Tonnes.
BM CLS – TYPE A CHASSIS LOAD SIMULATION
Pit wall mounted load simulation system.
Product Description
Product description
The BM CLS – Type A chassis load simulation system consists of cassettes rolling on rails placed on the edges of the inspection pit.
This system features a range of options that allows for a costumized configuration.
OPTIONS
-
-
Supplied with minimum 2 x CLS cassettes and up to 8 x CLS cassettes.
- Load simulation from 10 Ton up to 80 Ton.
- Designed so they can operate in existing pit rails used for the pit jack with a minimum of modifications.
- Each cassette has an integrated hydraulic cylinder hooked to the chassis via chains and special BM self-tensioning claws.
-
CLS rails are fitted approximately 3-4 meters before and after the brake tester.
-
The hydraulic hoses are drawn inside flexible caterpillar tracks that controls their position at all times and protect them against damages.
-
Can be supplied as a standalone system hence it can be used in conjunction with most brands of brake testers.
Technical Data
Technical data
| CLS CASSETTES | 2 – 8 pcs. |
|---|---|
| LOAD SIMULATION | 10 – 80 Ton |
| VEHICLE LOAD | 10, 20, 30, 40, 50 Ton |
Advantages
Advantages
- The load simulator cassettes remain attached at one point throughout the vehicle tester. The load simulator cassettes move forward with the vehicle during the test.
- The operator can fully control the load application from his remote control unit from the vehicle cabin.
- Will not reduce the functionality nor the operation area of the pit jack.
- Can be fitted to practically any inspection pit regardless of the width of the inspection pit etc.
Installation