BM17200 ROLLER BRAKE TESTER

The BM17200 roller brake tester has a unique hydraulic load simulation system allowing the operator to raise the roller bed out of the ground.

This brake tester features a large range of options that allows for a customized configuration.

OPTIONS

Load simulation using raised rollers (without use of slings).
Robust and long lasting:
- All steel is of highest quality and hot galvanized.
- Consists of an integral motorized gear box, two main rollers and a spring loaded sensor roller, all placed in a galvanized steel frame.
- The wear surfaces of the rollers are based on mesh steel to ensure a long life time and accurate measurements.
  
  Steel mesh plus a flintstone/bauxite surface for test of all tires except spike tires.
  
  Steel mesh for test of all tires including spike tires.
- Can be supplied in a minimum configuration and still allows for later upgrade to all options.
Easy to use with BM software:
- Integrated guide.
- Advanced graphics printout.
- Diagnostic printout with or without connection to PC/Notebook.
- Calculation of test results according to the requirements of many national authorities.
- BM FlexCheck software:
  
  Advanced data collection, storing and presentation of test results.
  
  Data capture from a complete inspection lane.
  
  PDA/smartphone/tablet solution that allows the operator to control and monitor the test results directly on a handheld unit.
  
  BM FlexCheck on smartphone and tablet
Infrared remote control with an operating distance of 15-25 metres.
Large and easy-to-read aluminium display with analogue and digital readout of all relevant test data.
- Integrated guiding system.
- Large analogue dials showing readings of left and right brake forces.
- 65 mm high bright digital readouts of other measurement results.
- Modularly designed so that it can be customized to existing and future demands.
- Display units are available in daN, kgf or kN.
Up to 3 displays can be connected.
Optional cable or radio air/hydraulic pressure system.
Optional automatic axle weighing.
Test of 4×4, 6×4 and 8×6 driven vehicles.
Optional cable or radio pedal force meter.
Conventional axle load simulation with use of slings.

The BM17200 roller brake tester is approved by several international authorities i.e. RWTÜV Germany and complies with the ISO standard.

ROLLER BED PER SIDE (1000 MM ROLLERS) LXWXH	1474 x 1255 x 645 mm
ROLLER BED PER SIDE (1250 MM ROLLERS) LXWXH	1474 x 1505 x 645 mm
ROLLER BED PER SIDE (1600 MM ROLLERS) LXWXH	1474 x 1855 x 645 mm
SUBFRAME FOR SPLIT BED INSTALLATION PER SIDE (1000 MM ROLLERS) LXWXH	1720 x 1320 x 650 mm
SUBFRAME FOR SPLIT BED INSTALLATION PER SIDE (1250 MM ROLLERS) LXWXH	1720 x 1570 x 650 mm
SUBFRAME FOR SPLIT BED INSTALLATION PER SIDE (1600 MM ROLLERS) LXWXH	1720 x 1920 x 650 mm
ROLLER DIAMETER	208 mm
ROLLER LENGTH	1000 mm 1250 mm 1600 mm
FRICTION COEFFICIENT OF ROLLER FROM FACTORY DRY/WET	Min. 0.8/0.7
WHEEL SPAN	850 to 2850/3350/4050 mm
DISTANCE BETWEEN ROLLER CENTRES	460 mm
MAXIMUM TEST AXLE WEIGHT	16000 kg 20000 kg
HYDRAULIC LIFT	12000 kg
GEAR MOTOR SIZE	11 kW 15 kW
MAX. BRAKE FORCE MEASUREMENT	4000 daN 6000 daN
TEST SPEED	2.3 km/h
LIFTING HEIGHT	200 mm
DISPLAY (LXWXH)	930 x 820 x 100 mm
CONTROL BOX (LXWXH)	760 x 600 x 210 mm
DISPLAY BRAKE FORCE SCALE	0 – 800 daN 0 – 4000 daN
BRAKE FORCE MEASURING ACCURACY	0 – 100 daN: +/-2 daN > 100 daN: +/-2% FS
PEDAL FORCE MEASURING ACCURACY	0 – 100 daN: +/-1 daN
POWER AND FUSES	3 x 400 Vac + N + PE, Min. 50/80 Amp 3 x 230 Vac + PE, Min. 80/125 Amp

BM17200 ROLLER BRAKE TESTER

Product description

OPTIONS

Technical data

Advantages

Installation

Authorized Distributor of

Newsletter

Media Sosial

Copyright © 2022 PT. JIM. All Rights Reserved.